Klantenservice
0
Sluiten

Categorieën

Filters

    EarSight Standard XLR Stereo Microfoon

    €129,-
    • Inclusief 21% btw: €129,-
    • Exclusief btw: €106,61
    8 Op voorraad: Op werkdagen voor 17:00 besteld, zelfde dag verzonden.
    Handgemaakte stereo microfoons met XLR-aansluiting. Zeer geschikt voor akoestische buitenopnames i.c.m. met uw audiorecorder.... Toon meer
    • Gratis verzending in Nederland vanaf €35,-
    • Op werkdagen voor 17:00 uur besteld? Zelfde dag verzonden!
    • Niet goed? Geld terug
    • We denken graag met u mee!

    Productomschrijving

    Earsight is a brand new stereo microphone, an exclusive Immersive Soundscapes product, handcrafted in France. This microphone will increase the capacity of your mobile audio recorder as it is extremely sensitive and has a remarkably low self noise (<14dBa), not to mention it's capacity to record in ultra wide stereo. This capacity is very effective for nature recording, nocmig, soundscapes, ASMR, binaural and much more. Ultra compact, it can be stored in the bag of your recorder or fit in your pocket. It's discretion enables you to capture sounds that are not possible with conventional microphones. The Immersive Soundscapes Earsight XLR microphone can be used in combination with the Tascam DR-40X and the Tascam DR-44WLB.

    Windscreens, especially for outdoor recording, are highly recommended and available here.

    PAIRED XLR VERSION (XLR 48v): For any recorder with a 48V phantom power supply. The body of the XLR connector is equipped with components to adjust the voltage to fit the microphone power needs. It can be used also in mono as a lavalier microphone.

    Technical data Earsight Standard:

    • Capsule type: Electret Condenser paired stereo set
    • Directivity: Omni
    • Sensitivity: -24 dB
    • Self Noise: 14 dB-A
    • Signal-to-Noise Ratio: 80 dB
    • Frequency Range: 20Hz to 20kHz
    • Maximum SPL Input: 110 dB
    • Operating Temperature: -25°C->+70°C
    • Connector: NEUTRIK metal XLR
    • Audiophile high grade audio capacitor: Yes
    • Cable length: 1.5 meter
    • Cable reference: Sommer Cable - low capacitance cable
    • Cable Diameter: Ø 2.6 mm outside diameter
    • Microphone diameter: Ø 8mm
    • Cable capacitance : 65pF/m
    • Cable conductance: 0.14 ohm/m

    Included:

    • 2 x Paired Earsight microphones
    • 2 x 3D adapter with XLR connection

    Guidelines on the use of Immersive Soundscapes microphones:

    • Set the recording gain as low as possible and then turn it up. This allows you to keep some headroom if a sound event has a higher dynamic range, this will help you avoid saturation. This prevents the appearance of background noise which increases with the gain (this depends a lot on the quality of the recorder).
    • Avoid tapping on the microphone to check if there is sound, this does not damage the microphone but can cause hearing damage.
    • Do not disconnect the jack or XLR microphone by pulling its cable.
    • Do not step on the cable as this could damage the connection between the cable and the capsule (the most fragile part of the microphone).
    • Be careful not to pull the cable when you want to disassemble the 3D adapter.

    Specificaties

    Artikelnummer
    XLR-1.5

    Reviews

    0 from 5Based on 0 reviews
    Schrijf je eigen review

    Er zijn nog geen reviews geschreven over dit product..

    Gerelateerde producten

    Maak uw bestelling compleet

    EarSight Standard XLR Stereo Microfoon
    € 129,-
    EarSight Standard XLR Stereo Microfoon
    8 Op voorraad: Op werkdagen voor 17:00 besteld, zelfde dag verzonden.
    Toevoegen aan winkelwagen

    Recent bekeken

    Wij slaan cookies op om onze website te verbeteren. Is dat akkoord? JaNeeMeer over cookies »