This is a complete ready to use plug in microphone using the amazing Primo EM272-Z1 omni directional capsule. The capsule is the lowest noise and most sensitive in this price range. It can be plugged directly into the microphone socket of most portable recorders and cameras.
The Mini Pluggy can be used in conjunction with the Mic Extension Cable.
Mono microphone - with 3.5 mm stereo plug, the mic signal is fed to the left channel only
Please note:
- This microphone requires "Plug-in Power". This is available on the microphone socket of every portable recorder and camera that we are aware of.
Some customers have found that the Clippy can pick up interference form Wi-Fi based radio transmitters, like the Rode Wireless Go
Specifications Mini Pluggy EM272 Omni with Windshield:
Microphone Capsule: Primo EM272
Acoustic Principle: Electret Condenser
Directional Pattern: Non (omni) directional
Frequency Range: 60 Hz to 18 kHz
Output Impedance: 2.4 k ohms
Signal to Noise Ratio: 80 dB typical
Clipping SPL: 119 dB SPL at 1 kHz
Sensitivity: -28 dB +/- 3dB at 1 kHz
Capsule Matching: n/a
Dynamic Range: 105 dB
Power Requirement: Plug-In Power, 3 volts (2-10V)
Current Consumption: 600 uA
Output Connector: 3.5 mm Stereo Plug, gold plated, signal is fed to left channel (tip) only
Dimensions, excluding windshield:
Overall length: 48 mm
Maximum diameter: 13 mm
Maximum projection from recorder: 35 mm
Projection from recorder when folded: 23 mm
Windshield:
Length: 23 mm
Diameter: 28 mm
