Lowell Instruments TCM-3 Deep Water Tilt Current Meter (4.500 Meters)
Lowell Instruments TCM-3 Deep Water Tilt Current Meter (4.500 Meters)

TCM-3 Deep Water Tilt Current Meter (4.500 Meters)

Artikelnummer: TCM3
Beschikbaarheid: Niet op voorraad
Levertijd: Levertijd op aanvraag

The TCM-3 is a current meter that is designed to operate off the continental shelf in water up to 4500m depth. The TCM-3 is constructed from toughened syntactic foam with a titanium pressure housing and is easily deployed by small ROVs. The relatively low cost makes it feasible to accurately measure current in many locations simultaneously.

The core of the TCM-3 is the MAT-1 Data Logger. The MAT-1 data logger was designed for NOAA and is ideally suited as the "brains" of a tilt current meter. The built-in data logger includes a USB communication interface, a microSD flash memory card, and a long-life lithium battery.

Operation

The TCM-3 Tilt Current Meter measures current using the drag-tilt principle. The logger is buoyant and is typically attached to the bottom via a short flexible tether to a small lead or concrete anchor. Moving water tilts the logger in the direction of flow. The TCM-3 contains a 3-axis accelerometer and 3-axis magnetometer for measuring tilt and bearing. The resulting orientation data is converted to current by applying calibration coefficients with the included software.

Key Features & Benefits
  • Water velocity for a fraction of the cost of an acoustic meter
  • Tilt compensated compass for bearing measurements
  • Simple & rugged design is easy to deploy from a ROV
  • Internal temperature sensor is accurate to +/-0.1C
  • 8 GB memory card eliminates memory concerns
  • Lithium battery allows continuous 4Hz sampling for more than 1 year
  • USB 2.0 with standard cable and drag and drop data file offload
  • Easy meter configuration and data conversion with Windows® software (free download).
Package Contents
  •   TCM-3 Tilt Current Meter
  •   Lithium battery (installed in logger)
  •   8 GB microSD card (installed in data logger)
  •   1 m (3 ft) USB A to micro-B Cable
  •   Spare O-ring (pre-lubricated)
  •   30 cm (12") lanyard

Datasheet TCM-3 Deep Water Tilt Current Meter

User Manual

 

Domino Software

Domino Software is Lowell Instrument's Python based, open source software for use with the data loggers and current meters. It is used forconfiguration and control of meters, as well as for conversion of binary data to useful formats. It can be downloaded here.

System Requirements Windows for Domino

  • Windows 7/8/8.1/10 (32 or 64 bit)
  • Any Intel or AMD x86 processor, Dual Core 2.0+ GHz recommended
  • 1 GB RAM minimum  (2+ GB recommended)
  • 1 GB disk space for the application, additional space for files
  • 1024 x 720 monitor minimum
0 sterren gebaseerd op 0 beoordelingen
Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergen Meer over cookies »