EarSight Nano 2 PIP Stereomikrofon

Name: Immersive Soundscapes EarSight Nano 2 PIP Stereomikrofon
Brand: Immersive Soundscapes
Price: 129.00 USD
Availability: InStock

Alles über Mikrofone

Marke: Immersive Soundscapes

$151.46 5 Auf Lager: An Werktagen vor 17:00 Uhr bestellt, noch am selben Tag versendet.

Handgefertigte Stereomikrofone im Nano-Design mit PIP-Anschluss. Geeignet für akustische Außenaufnahmen inklusive nocmig in Kombination mit Ihrem Audiorecorder.... Mehr anzeigen

Versandkosten nur 7,82 € nach Deutschland
An Werktagen vor 17 Uhr bestellt? Versand am selben Tag!
14 Tage Rückgaberecht
Bei uns ist nichts unmöglich!

Produktbeschreibung

A different capsule for an even smaller microphone, the EarSight Nano 2 PIP Stereomikrofon can be used as a lavalier microphone for stereo voice recording or hidden on a backpack for stealth recording without being noticed. The smallest microphone of Earsight product line.
If microphone size is important to you, this is the ideal mic. The same quality of manufacture as the Earsight, always assembled in France and tested before shipping. Second version replaces the old one with 3d printed casing with carbon fiber reinforcement fiber. The cable is upgraded also with thinner Mogami cable to keep the microphone as light and smallest as possible.
The Comica CVM-MF1 windscreen is also compatible without the need for a 3D adapter like the standard Earsight. Very effective for nature recording, soundscapes, ASMR, binaural, travelling. The EarSight Nano 2 PIP Stereomikrofon can be used in combination with the Tascam DR-40X and the Tascam DR-44WLB.

Windscreens, especially for outdoor recording, are highly recommended and available here.

Technical data EarSight Nano 2 PIP Stereomikrofon:

Capsule type: Electret Condenser paired stereo set
Directivity: Omni
Sensitivity: -27 dB
Self Noise: 17 dB-A
Signal-to-Noise Ratio: 77 dB
Frequency Range: 20Hz to 20kHz
Maximum SPL Input: 110 dB
Operating Temperature: -20°C->+70°C
Connector: NEUTRIK metak JACK OR XLR
Audiophile high grade audio capacitor FOR XLR VERSION
Cable reference: MOGAMI lavalier microphone cable
Cable Diameter: .Ø2 mm outside diameter
Microphone diameter: Ø9,5mm
Almost insensitive to RFI noise
hand-crafted silver-based soldering
Cable soldered directly to the capsule, no additional connectors like mini XLR to cause noise and failure.

Included:

2 x Paired Earsight Nano microphones
2 x Clips

Guidelines on the use of Immersive Soundscapes microphones:

Set the recording gain as low as possible and then turn it up. This allows you to keep some headroom if a sound event has a higher dynamic range, this will help you avoid saturation. This prevents the appearance of background noise which increases with the gain (this depends a lot on the quality of the recorder).
Avoid tapping on the microphone to check if there is sound, this does not damage the microphone but can cause hearing damage.
Do not disconnect the jack or XLR microphone by pulling its cable.
Do not step on the cable as this could damage the connection between the cable and the capsule (the most fragile part of the microphone).

Schlagworte:audio (141)microfoon (71)microphone (82)Mikrofon (67)