EarSight Nano XLR Stereomikrofon

Name: Immersive Soundscapes EarSight Nano XLR Stereomikrofon
Brand: Immersive Soundscapes
Price: 109.00 GBP
Availability: InStock

Alles über Mikrofone

Marke: Immersive Soundscapes

£112.78

£95.30 2 Auf Lager: An Werktagen vor 17:00 Uhr bestellt, noch am selben Tag versendet.

Handgefertigte Stereomikrofone im Nano-Design mit XLR-Anschluss. Geeignet für akustische Außenaufnahmen inklusive nocmig in Kombination mit Ihrem Audiorecorder.... Mehr anzeigen

Versandkosten nur 7,82 € nach Deutschland
An Werktagen vor 17 Uhr bestellt? Versand am selben Tag!
14 Tage Rückgaberecht
Bei uns ist nichts unmöglich!

Produktbeschreibung

A new capsule for an even smaller microphone, the Earsight nano with XLR adapter can be used as a lavalier microphone for stereo voice recording or hidden on a backpack for stealth recording without being noticed. It is also a really good option to increase your Gopro sound (with Gopro mic adapter not included and works only with the PIP version).

If microphone size is important to you, this is the ideal mic. The same quality of manufacture as the Earsight, always assembled in France and tested before shipping.

The EarSight Nano XLR Stereo Microphone is very effective for nature recording, soundscapes, ASMR, binaural, travelling, nocmig and much more. The Earsight Nano XLR microphone can be used in combination with the Tascam DR-40X and the Tascam DR-44WLB.

Windscreens, especially for outdoor recording, are highly recommended and available here.

PAIRED XLR VERSION (XLR 48v): For any recorder with a 48V phantom power supply. The body of the XLR connector is equipped with components to adjust the voltage to fit the microphone power needs. It can be used also in mono as a lavalier microphone.

Technical data Earsight Nano:

Capsule type: Electret Condenser paired stereo set
Directivity: Omni
Sensitivity: -27 dB
Signal-to-Noise Ratio: 77 dB
Frequency Range: 20Hz to 20kHz
Maximum SPL Input: 110 dB
Operating Temperature: -20°C->+70°C
Connector: NEUTRIK metal: XLR
Audiophile high grade audio capacitor: Yes
Cable length: 1.5 meter
Cable reference: Sommer Cable - low capacitance cable
Cable Diameter: Ø2.6 mm outside diameter
Microphone diameter: Ø8mm
Cable capacitance : 65pF /m
Cable conductance: 0.14 ohm/m
Almost insensitive to RFI noise

Included:

2 x Paired Earsight Nano microphones
2 x Clips

Guidelines on the use of Immersive Soundscapes microphones:

Set the recording gain as low as possible and then turn it up. This allows you to keep some headroom if a sound event has a higher dynamic range, this will help you avoid saturation. This prevents the appearance of background noise which increases with the gain (this depends a lot on the quality of the recorder).
Avoid tapping on the microphone to check if there is sound, this does not damage the microphone but can cause hearing damage.
Do not disconnect the jack or XLR microphone by pulling its cable.
Do not step on the cable as this could damage the connection between the cable and the capsule (the most fragile part of the microphone).
Be careful not to pull the cable when you want to disassemble the 3D adapter.

Schlagworte:audio (141)microfoon (72)microphone (83)Mikrofon (68)