HOBO-Leitfähigkeitssensor für die MX800-Serie

Name: Onset HOBO-Leitfähigkeitssensor für die MX800-Serie
Brand: Onset
Price: 916.03 EUR
Availability: InStock

Alles über Marine & Süßwasser Messgeräte

Marke: Onset

€916,03 0 Auf Lager: 3-6 Wochen

Ein Leitfähigkeits- und Temperatursensor zur Verwendung mit Wasserloggern der HOBO MX800-Serie.... Mehr anzeigen

Versandkosten nur 7,50 € nach Deutschland
An Werktagen vor 17 Uhr bestellt? Versand am selben Tag!
14 Tage Rückgaberecht
Bei uns ist nichts unmöglich!

Produktbeschreibung

The conductivity sensor is an interchangeable sensor that works with HOBO MX800 Series Water Loggers to measure conductivity and temperature. With this sensor attached to a HOBO MX800 Series Water Logger, the logger can also calculate specific conductance, salinity, and total dissolved solids (TDS).

The conductivity sensor can be attached directly to the fully submersible MX801 model, or attached via cable to the direct read MX802 model, which doesn’t require having to pull the sensor out of the water to download data.

Features

4-electrode conductivity sensor provides wide measurement range for monitoring freshwater or saltwater
Conductivity sensor is centrally located to minimize effects from stilling wells or protective guards
1” diameter for use in narrow wells (with cable to MX802 above the well)
Temperature sensor placement near the sensor tip for fast fast response time
Specially treated stainless steel holds up in saltwater

Please note:

Requires a HOBO MX801 or MX802 Data Logger, the HOBOconnect app, and a compatible mobile device or Windows computer. System requirements for the app can be found at the bottom of the HOBOconnect software page.

Specifications HOBO Conductivity Sensor for MX800 series

Conductivity Measurements

Measurement Range: Electrical conductivity and specific conductance: 0 to 100,000 µS/cm
Salinity using PSS-78: 2 to 42 PSU
Total Dissolved Solids (TDS): 0 to 100,000 mg/L
Calibrated Range: Electrical conductivity: 50 to 80,000 µS/cm
5° to 35°C (41° to 95°F)
Accuracy: Conductivity: +/-2% or 15 µS/cm whichever is greater
Salinity: +/-2% of reading or 0.1 PSU, whichever is greater
Resolution: Conductivity:
0.1 µS/cm from 0 to 1,000 µS/cm
1 µS/cm from 1,000 to 10,000 µS/cm
10 µS/cm from 10,000 to 100,000 µS/cm
Salinity: 0.01 PSU
TDS: 0.1 mg/L
Response Time: 1 second to 90% at a stable temperature

Temperature Measurements

Range: -20° to 50°C (-40° to 122°F), non-freezing water
Accuracy: ±0.15°C (±0.27°F) from 0° to 50°C (32° to 122°F)
Resolution: 0.01°C at 25°C (0.018°F at 77°F)
Response Time: 3 minutes to 90% in water (typical)
Drift: <0.1°C (0.18°F) per year

Sensor

Dimensions: 2.5 cm (1 inch) diameter, 15 cm (6 inches) length
Weight: Approximately xx g (xx oz) in air; approximately xx g (xx oz) in saltwater
Wetted Materials: Passivated 316 Stainless steel housing rated for use in saltwater, Viton and Buna-N O-rings, PET sensor connector
Conductivity sensor: PET, platinum plating on electrodes
Note: Sensor should be mounted so that it is not in contact with other metals
Environmental Rating: IP68; Waterproof to 100m