The HOBO MX2203 TidbiT water temperature logger leverages the power of Bluetooth Low Energy (BLE) to deliver high-accuracy temperature measurements straight to your iOS or Android mobile device. Designed for durability, this rugged waterproof logger is ideal for long-term deployments in streams, lakes, and oceans (up to 400 foot depths). Data collection in the field has never been easier!
Highlighted Features
In what environment does this data logger operate?
This data logger operates in indoor, outdoor and underwater environments.
What measurements does this data logger support?
The MX2203 data logger supports the following measurements: Temperature and Water Temp
Specifications
Temperature Sensor (MX2203) | |
Range | MX2203: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water |
Accuracy | ±0.25°C from -20° to 0°C (±.45°F from -4° to 32°F) ±0.2°C from 0° to 70°C (±0.36°F from 32° to 158°F) |
Resolution | 0.01°C (0.018°F) |
Drift | <0.1°C (0.18°F) per year |
Response Time | MX2203: 17 minutes typical to 90% in air moving 1 m/s, unmounted; 7 minutes typical to 90% in stirred water, unmounted |
Logger | |
Radio Power | 1 mW (0 dBm) |
Transmission Range | Approximately 30.5 m (100 ft) line-of-sight |
Wireless Data Standard | Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0) |
Logger Operating Range | -20° to 70°C (-4° to 158°F) |
Logging Rate | 1 second to 18 hours |
Buoyancy (Fresh Water) | MX2203: 3.1 g (0.11 oz) negative |
Waterproof | MX2203: To 122 m (400 ft) |
Water Detection | Water conductivity level of 100 µS/cm or greater necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected. The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C (32°F). |
Memory | 96,000 measurements |
Battery | CR2477 3V lithium, user replaceable in MX2203, non-replaceable in MX2204 |
Battery Life | 3 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always On in software. |
Time Accuracy | ± 1 minute per month at 25°C (77°F) |
Full Memory Dowload | Approximately 45 seconds; may take longer the farther the device is from the logger |
Wetted Materials | MX2203: Polypropylene case, Delrin® battery cover, EPDM O-ring, stainless steel screws, Santoprene® (TPE) boot |
Dimensions | MX2203: 4.45 x 7.32 x 3.58 cm (1.75 x 2.88 x 1.41 inches) |
Weight | MX2203: 36.2 g (1.28 oz) |
| Environmental Rating | IP68 |
Es wurden noch keine Bewertungen für dieses Produkt abgegeben..
Vervollständigen Sie Ihre Bestellung
Suchen Sie die Bestellung, die Sie widerrufen möchten
Geben Sie Ihre E-Mail-Adresse und Ihre Bestellnummer ein.
Prüfen Sie Ihren Posteingang
Wenn Ihre Angaben mit einer Bestellung übereinstimmen, erhalten Sie eine E-Mail mit einem Link, über den Sie diese betrachten und verwalten können.
