Designed for professionals who need the highest quality recordings, the Wildlife Acoustics Echo Meter Touch 2 Pro features a state-of-the-art ultrasonic microphone capable of sample rates of 256kHz and 384kHz, creating best-in-class, 16-bit full-spectrum recordings.
The Echo Meter Touch app features pro-only options including adjustable gain and advanced trigger settings – and of course, the latest Kaleidoscope Pro auto-ID classifiers for bats species in North America, Europe, the Neotropics and South Africa.
Connect the PRO Ultrasonic Module to your device, and the app will activate advanced software features designed for professional biologists. Choose a sample rate of 256kHz or 384kHz. Control recording amplitude by selecting one of three gain settings. Set specific trigger length, trigger window, trigger sensitivity and auto-trigger time. You can also choose audio division ratio for RTE, heterodyne, and time-expansion listening modes. You can even enable/disable Nightly Sessions Mode and Real-Time ID.
The Echo Meter Touch 2 uses an USB-C plug. To connect the Echo Meter Touch to a phone with a USB micro input, a USB-C to Micro USB adapter is required.
The Echo Meter Touch 2 does not work with a Lightning-socket!
Requirements
- Android OS version 8.0 or later or iOS 12 or higher.
- An OS version later than 8.0 is not a guarantee that the device is compatible, see the list below.
- The Echo Meter Touch app will not load on devices running any version of Android Go.
- At least 1 GB of total RAM.
- At least 600 MB of storage for buffering the spectrogram.
- OTG compatibility.
- Equipped with a USB-C adapter
Android device compatibility
These devices are currently compatible with Echo Meter Touch 2 and Echo Meter Touch 2 Pro when running Android versions 8 or higher. Devices on this list (especially older ones) may not work with future versions of the Echo Meter Touch or may become incompatible with the current Echo Meter Touch 2 due to changes in the Android operating system. If a device is not listed, that means that we do not yet have enough information to know if it works correctly with the Echo Meter Touch 2 or not (including many that are running Android 8 or later). Newer devices (i.e. released within the last two years or so) are much more likely to work than older ones.
iOS device compatibility
General Requirements:
- iOS version 12 or later.
- At least 600 MB of storage for buffering the spectrogram.
- EMT 2 will work with a USB-C or a micro-USB port on your Android device. EMT 2 modules made before May 2022 have a micro-USB plug and modules made after have a USB-C plug. Either type of module can work on either type of Android device, but you will need to use an adapter if they do not match. See the "USB Adapter, Extension Stub, and Extension Cable Compatibility" section below for more info.
- Devices with a USB-C port (not a Lightning Port) require the Apple-branded “USB-C to Lightning Adapter”.
Compatible Devices:
- iPhone: All models of 8, “X”, 11, 12, 13, 14, and 15
- iPhone SE 2nd and 3rd generation
- iPad Pro 12.9-in: 2nd generation or later
- iPad Pro 11-in: All models
- iPad: 6th generation or later
- iPad Air: 3rd generation or later
- iPad Mini: 5th generation or later
- iPod Touch: 7th generation
